Produse pentru magnet din (1323)

Equipped with pole type 50+ in long narrow design and a maximum load capacity of 400/600/1000 kg, which is achieved with material thicknesses from 15mm, these easy-to-guide and operate devices are recommended for lifting battens, rails, pipes, beams and bars. Also using pole extensions, which make it easier to position the magnets on long narrow bars.

FXE-MH electro-permanent lifting magnets are especially suitable for transporting slabs and blocks. The electro-permanent modules type MH are designed to safely lift large loads with a large air gap. Electro-Permanent Lifting Magnets FXE Electro-Permanent Lifting Magnets from Flaig Magnetsysteme have been setting standards for over 20 years Electro-Permanent Lifting Magnets are the best choice if: the load to be moved is too large for permanent magnets the lifting magnet must be operated and controlled ergonomically the geometry of the load does not fit permanent magnets the lifting magnet must be remote controlled and possibly load adjustable the load capacity is too large in relation to the material thickness for permanent magnets

FXE-TP Elektro-Permanent Lasthebemagnete eignen sich durch ihre spezielle Bauform bestens für Träger und Profile. Die Aufnahme von Trägern am Profilsteg ist durch die speziell geformte Poloberfläche problemlos möglich. FXE-TP Lasthebemagnete gibt es auch als Traversenlösung FXE-TTP, speziell auf Ihre Anwendung zugeschnitten.

FXE TTO lifting magnet trusses are used to remove large areas from laser or flame cutting tables. Parts from 100x100mm are removed from the table in their entire layer. Depending on the material thickness, whole sheets can also be placed with the FXE-TTO. The design of the system depends on the sheet format to be moved (uncut, LxWxH) and the dimension of the smallest blank.

Battery-powered load lifting magnets are location-independent and flexible like permanent load lifting magnets and at the same time have the advantage of remote controllability and operability at the push of a button. They are mainly used where larger loads are continuously handled, as they can be switched without physical effort. Another common application is where access to the touchdown point is difficult. All our battery-powered lifting magnets are equipped with an IR remote control and a high-quality, deep discharge-proof gel battery. FBM load lifting magnets comply with the latest standard and have been designed according to the main criteria of safety and ease of use.

For lifting of ground parts, bulk material and for occasional sorting out of magnetizable parts. ERM are equipped with mounted switch and integrated rectifier, for direct connection to 230 V mains voltage. The field depth is approx. 80-120 mm. Not permitted for transporting solid workpieces in unprotected areas.

The temperature indicated refers to the maximum operating material temperature. However, that value can be reduced according to geometry. Article number:RM021ACSo88r-00 Grade:ANC5 L mm:22.2 H mm:11.3 h mm:3.3 B mm:7.9 D mm:6.35 Force* N:13 Surface:red Weight g:18 Temperature °C:180

The above mentioned filter bars are our standard designs. Here the end pieces are not sealed tight and therefore only suitable for dry applications. Not available ex stock, manufactured on demand Alternative to the standard we also offer individual solutions: » Seal-welded model for use in liquids (e.g. water, coolant) » High-quality stainless steel enclosure for use in food production » Increasing the max. operating temperature up to 350 °C » Manufacture of individual, not standardised sizes Article number:MS100NdQu00rh00 L mm:100 B mm:100 H mm:40 Temperature °C:80 Diameter of filter bars:25

These systems can only be fastened by adhering (glue or double-sided tape). Adequate adhesive is available from specialised trade. The following materials can be found at the rear: A18B-Ks: Polyamide (PA) A22B-Ks: Polyamide (PA) A31B-Ks: Galvanised steel AS031NdB-00s-03: Polyamide (PA) A43B-Ks: Polyamide (PA) Article number:A18B-Ks D mm:18 H mm:Force* N Force* N:37 Shear force* N:11 Weight g:6.5 Temperature °C:60

The temperature indicated refers to the maximum operating material temperature. However, that value can be reduced according to geometry. Article number:RM028ACSo88r-00 Grade:ANC5 B mm:H mm H mm:25.4 D mm:28.6 d mm:9.5 d1 mm:6.7 d2 mm:22.9 Force* N:26 Surface:red Weight g:31 Temperature °C:180

The bar magnets are workable on both sides. On the holding surface an individual shape is possible and the adhesive force is adjustable. Bar magnets with an area for a free machining on the adhesive surface moreover offer a better wear protection compared with other bar magnets. Alternative to the standard we also offer individual solutions: » Stainless steel housing + pole shoes » Greater holding power » Greater temperature until 280 °C Article number:SG006NdB-00rh02 D mm:6 (h6) H mm:20 +0.2/ -0.2 A¹ mm:10 Force 1* N ²:B¹ mm B¹ mm:Force 2* N ² Force 2* N ²:12 Weight g:Temperature °C Temperature °C:150

Cable holder, plastic, for magnetic systems, black Article number:KaH-15x10Ks L mm:15 B mm:10 D mm:4.5

MBX Magnetspannblöcke haben gegenüberliegende Spannseiten die beim Betätigen aktiviert werden. Sie sind dazu konzipiert, Werkstücke auf Stahloberflächen wie Maschinen- oder Montagetische zu spannen. Über den Innensechskant der Schaltwelle können auch mehrere MBX miteinander verbunden werden um längere oder größere Werkstücke zu spannen.

Direct mounting of the bar magnet in iron reduced the holding power by up to 15% due to magnetic short circuiting. To avoid this, certain distances need to be maintained between the brass casing of the bar magnet and the iron. The distances are also to be adhered to if the bar magnet was shortened by dimension A. Please refer to the above column for recommended distances (distance mm). The holding surface is ground and therefore not galvanised. Alternative to the standard we also offer individual solutions: » Stainless steel housing » Housing completely galvanised to better corrosion protection » Greater temperature until 280 °C » Stainless steel pole shoes Article number:SG-6-SC/h6 D mm:6 (h6) H mm:20 +0.2/ -0.2 A¹ mm:10 Distance mm:1.5 Weight g:4.5 Temperature °C:200

SWR Magnetspannwinkel sind schaltbare, präzise Geräte, die höchsten Qualitätsanforderungen genügen. Jeder Schenkel ist separat schaltbar und die Haltekraft lässt sich zum Positionieren stufenlos regeln. Die prismatisch geschliffene Unterseite ermöglicht das Arbeiten an Flach- und Rundmaterial. SWR gibt es in den Ausführunge SWR 150, Winkeeinstellung rasten bei 30,45,90,120,150,180° oder frei über Arretierschraube. SWR 180, Winkeeinstellung 45°-225°.

Info frame for glass surfaces with direct sunlight Perfectly showcases advertising and information in shop windows and on car windscreens: Thanks to their heat and UV resistance, the extremely durable DURAFRAME® SUN info frames are suitable for use on glass panes with direct sunlight. In addition, the non-reflective film adheres without glue by means of adhesion and can be removed without leaving any residue. Content such as advertising or opening hours can be easily replaced thanks to the magnetic fastener and can be read on both sides of the glass. Colour:silver Material:plastics Reference:484223

Privacy filter with magnetic attachment. Prevents others from reading your screen from the side and protects against dirt. Including bag and microfibre cloth. • Magnetic privacy filter for 14.0” screens • Limited viewing angle of 60 degrees protects sensitive data • Idea for use in public • Incl. sleeve for storage • Matt surface and reduced blue light protect your eyes while working • Practical attachment via two neodymium magnets • Protects the screen against scratches and dirt • Can also be used on touchscreens • Incl. microfibre cloth to clean screen and filter • Compatible with screens measuring 310 mm x 174 mm (W x H) / 12.2“ x 6.9“ (W x H) Colour:anthracite-grey Material:plastics Reference:514457

Document sleeve with a magnetic strip on the back for use on metal surfaces. • Document sleeve in A5 landscape format with two magnetic strips on the back • Perfect for use on metallic surfaces, such as warehouse shelves, racking and metal containers • Coloured rear foil and transparent front foil made of heavy-duty polypropylene • Suitable for scanners and indelible • Inserts can be exchanged quickly • Internal dimensions: A5 landscape / 210 x 148 mm (W x H) • Suitable printable insert labels: Article number 485502 Colour:yellow Material:plastics Reference:174304

NMS Precision Sine Tables with built PMNM chipboard impress with very good workmanship and precision. The sine table base is hardened to 60 HRC, burnished and precision ground. The angle is adjusted according the sine principle by using gauge blocks. Our NMS sine tables are used in the EDM, grinding and measuring in the highest precision. Technical Details: — Precision Sine Table with built fine pole chipboard — Holding power 100N/cm2 — Magnetic field height 5mm — Pole plate wearing limit 5mm — plane parallelism 0,005/100mm — Angular accuracy +-0.0013°/+-5sec.

SWR magnetic clamping brackets are switchable, precise devices that meet the highest quality requirements. Each leg can be switched separately and the holding force can be infinitely adjusted for positioning. The prismatic ground underside enables work to be carried out on flat and round material. SWR is available in the following versions: SWR 150, angular adjustment locking at 30,45,90,120,150,180° or free via locking screw. SWR 180, angle adjustment 45°-225°.

The magnet assembly can be clipped into the groove. It is freely movable or can be fixed by a threaded pin. The magnetic core is protected by a plastic cover and has a large magnet area in the groove. The magnetic system is lying nearly plan and has a closed, smooth adhesive surface which avoids scratches on the surface and the concentration of metal shavings. Alternative to the standard we also offer individual solutions: » Plastic housing in special colours » Temperature resistance up to 150°C Article number:MS041NdRe03K-00 L mm:41 b mm:9.50 H mm:10.20 Force* N:10 Weight g:4.5 Temperature °C:80 suitable for profiles:30x30 groove 6

Bar magnet NdFeB, steel body with fitting tolerance h6 Article number:S4PNd D mm:4 (h6) H mm:10 +0.2/ -0.2 Force* N:2.5 Temperature °C:80

To differentiate the otherwise identical SmCo series the NdFeB bar magnets are coloured blue on the holding surface. Direct mounting of the bar magnet in iron reduced the holding power by up to 15% due to magnetic short circuiting. To avoid this, certain distances need to be maintained between the brass casing of the bar magnet and the iron. The distances are also to be adhered to if the bar magnet was shortened by dimension A. Please refer to the above column for recommended distances (distance mm). The holding surface is ground and therefore not galvanised. Alternative to the standard we also offer individual solutions: » Stainless steel housing » Housing completely galvanised to better corrosion protection » Greater holding power » Greater temperature until 280 °C » Stainless steel pole shoes Article number:SG-6-Nd/h6 D mm:6 (h6) H mm:20 +0.2/ -0.2 A¹ mm:10 Distance mm:1.5 Force* N:10 Weight g:4.5 Temperature °C:80

Der HGF Handgaussmeter ist ein leicht zu bedienendes Präzisionsmessgerät. Mit der superfeinen 1mm Sonde können Magnetflussdichten extrem nahe am Magnetpol und in sehr engen Luftspalten gemessen werden. Das HGF kann zwischen magnetischen Gleich- und Wechselfeldern sowie auch zwischen den Einheiten Gaus und Tesla umgeschaltet werden. Am Displayrand wird im Modus "magnetische Gleichfelder" ständig die anstehende Polarität N/S angezeigt, die Funktion "Spitzenwertanzeige" erleichtert die Suche nach magnetischen Flächen z.B. beim Aufspüren von ungewolltem Restmagnetismus. Im Lieferumfang enthalten sind neben dem Messgerät, der 1mm Transversalsonde und den Batterien auch ein Schutzetui und eine Schutzkappe für die Sonde. Somit ist das HGF auch für den Serviceeinsatz in der Industrie geeignet. Unsere Techniker nutzen es zur Prüfung von schweren Lasthebemagneten und Spannsystemen.

Magnetic ledges, hard ferrite, metal body, galvanized Article number:ML-TypA L mm:80 B mm:20 H mm:12 Force* N:110 Weight g:97 Temperature °C:200

Umpolsteuergeräte aus der FXL-C Familie steuern nicht nur zuverlässig unsere FXL Magnetspannplatten, sondern nahezu alle am Markt befindlichen Elektro-Permanent Magnetsysteme. Eingangsspannungen von 100-500 VAC / 50-60Hz und dazu passend modulierte, gepulste Ausgangsspannungen und Impulsleistungen von bis zu 24 kVA sind einzigartige Eckdaten, welche nur unter extremen Bedingungen gefordert sind, aber im normalen Einsatz für maximale Stabilität sorgen.

Die MCF Steuereinheiten sind konzipiert um Elektro-Permanent Magnetmodule zu betreiben. Sie steht sowohl als Einzelplatine zum Einbau in kundenseitig vorhandene Schaltschränke, als auch als IP 54 Schaltschranklösung zur Verfügung. Es können außer den FXE Lasthebemagnetmodulen auch andere Elektro-Permanent Magnetkomponenten wie Magnetspannplatten oder Magnetspannblöcke, sowohl im Aufbau als einfaches System (ALNICO) wie auch im Aufbau als doppeltes System (ALNICO/ND) mit der MCF angesteuert werden.

Plate-spreading-magnets are used for separating of stacked iron and steel sheets. The sheet separators are laterally grown from the sheet stack, they magnetize the sheets with the same poles, which repel them from each other. Plate-spreading-magnets apply both in automated systems where plates with vacuum or transshipped are magnetic, and the manual work, where the gripping sheet is greatly facilitated by their help. Our Plate-spreading-magnets consist of a reinforced magnet system, which is installed in a stable sheet steel housing.

Our rubber caps are used as scratch protection especially on delicate surfaces. They can be used with our flat pot and decoration magnets in order to protect the surface. Moreover it lowers the noise when putting on the magnet. Article number:GU-50L D mm:50 d mm:20 h mm:0.5

NMS Präzisions-Sinustische mit eingebauter PMNM Spannplatte überzeugen durch sehr gute Verarbeitung und Präzision. Der Sinustischgrundkörper ist auf 60 HRC gehärtet, brüniert und präzisionsgeschliffen. Die Winkeleinstellung erfolgt nach dem Sinusprinzip mithilfe von Endmassen. Unsere NMS Sinustische finden Verwendung beim Erodieren, Schleifen und Messen in höchster Präzision. Technische Details: — Präzisions-Sinustisch mit aufgebauter Feinpol-Spannplatte — Nennhaftkraft ca. 100 N/cm2 — Magnetfeldhöhe ca. 5mm — Abnutzbarkeit der Polplatte 5mm — Planparallelität 0,005/100mm — Winkelgenauigkeit +- 0,0013° / +- 5sec.